3 Effective Ways To Contain Mold

6/16/2021 (Permalink)

Mold containment in Barrington Hills, IL.

Mold Containment

Many mold spores are airborne. These small particles can travel through the air from one part of a home to another, causing colonies to form inside air ducts or in any other locations that are conducive to growth. Learn about three ways mold remediation professionals can limit the spread of mold contamination throughout a residence located in Barrington Hills, IL.

1. Sealing Off an Area With Plastic Sheeting
Depending on the extent of an infestation, remediation experts may do limited or full containment. Limited containment involves enclosing the affected area in a single layer of 6-mil polyethylene sheeting until cleanup is complete. This sheeting should be secured to the floor and ceiling and access should be provided through an outside flap. Full containment requires double layers of polyethylene sheeting and a decontamination chamber or airlock.

2. Creating a Vacuum With Negative Air Pressure
Negative air pressure can help to remove mold spores from the area being cleaned and prevent mold from spreading as workers enter and leave a containment zone. The severity of a mold infestation or the presence of mycotoxins may determine whether this measure is necessary to limit the square footage of a home that is affected by mold contamination.

3. Making an Airlock or Decontamination Chamber
Full containment calls for the creation of an airlock or decontamination chamber. In the simplest terms, this area is a transitional room between the contaminated area being cleaned and the remainder of the residence. Workers put on personal protective equipment and take off contaminated articles in this space and store contaminated materials in a sealed bag.
Homeowners often lack access to the right materials and methods for restricting the spread of mold contamination throughout a residence in Barrington Hills, IL. Mold cleanup experts can put up plastic sheeting and take any other measures that are necessary to keep spores from spreading during remediation.