How To Maintain Your Commercial Generator
A commercial generator provides emergency power to your building when the power goes out. A standby unit turns on automatically during an outage. Commercial machines typically run on either propane or natural gas, so you don't have to worry about refueling them. The average machine lasts about 3,000 hours, but it requires regular maintenance to keep it running smoothly.
Keys to Maintaining Your Equipment
Semi-annual service is critical to keep your equipment functioning properly and to avoid generator problems. A good rule of thumb in Gilberts, IL, is to have it serviced in the spring and fall so that you stay on a regular schedule. If you have a maintenance staff to handle mechanical duties, they can perform the checks. Otherwise, it's smart to find a certified mechanic to help. Typical maintenance includes the following:
- Change serviceable parts as needed. Air filters, spark plugs and fuel filters must be changed according to the manufacturer's instructions.
- Check oil levels and replace engine oil regularly. Keep levels close to full, but don't overfill.
- Clean the battery on your generator often to keep it free from corrosion. Make sure all connections are tight as well. Test the battery to make sure it is working properly.
- Inspect the drive belts for cracks or tears and replace as needed.
- Check the alternator and transfer switch for any signs of damage.
- Clean dirt, leaves and other debris from around the unit.
If your equipment malfunctions and your building floods, call a water damage repair service right away.
Tips for Running a Test Cycle
Many units are designed to automatically run a test cycle on a regular basis. This keeps the system well-lubricated and helps to burn off any moisture. It also recharges the battery. If your unit doesn't come equipped with this feature, run it manually for at least a half-hour every month.
Keep your commercial generator well-maintained so that it works well when you need it most.